公司简介 Sika材料汇总 灌浆料 环氧地坪 聚氨酯地坪 耐磨地坪 耐磨罩面漆 密封胶 工程加固 联系我们

                                                                      Sikaflex-HP 1

                                                                      1 component elastic polyurethane based sealant.

                                                                      Product description: Sikaflex-HP 1 is an elastic joint sealant based on polyurethane. Sikaflex-HP 1 is a 1-component, ready for use product and reacts with moisture to a elastic sealant.

                                                                      Fields of application: · Joints in Building Construction,

                                                                      - e.g. Balcony Parapets, .

                                                                        • on concrete
                                                                        • on aerated concrete
                                                                      • connection joints in building construction

                                                                      - around windows and doors

                                                                      - facade and metal claddings and concrete elements

                                                                      • sealing of joints of wooden and metal structures

                                                                      Do not use Sikaflex-HP 1 as glass sealer, in floor joints, glass sealing and in joints with permanent water immersion. Before using on natural stone ask your sales manager.

                                                                      Advantages:

                                                                      • excellent adhesion to many substrates
                                                                      • bubble free curing
                                                                      • very good workability
                                                                      • movement capability 20%

                                                                      Packaging: 310 ml cartridges, 12 cartridges per box

                                                                      600 ml sausages, 20 sausages per box

                                                                      Colour : concrete grey, white

                                                                      Colour deviations may occur due to chemicals, high temperature, UV-radiation (especially with colour shade white). A change in colour do not influence the technical and protective quality of the product.

                                                                      Shelf life: In original containers, in cool and dry environment at temperatures between +10°C and +25°C: 12 months.

                                                                      Technical data:

                                                                      Characteristic values

                                                                       

                                                                      Remarks

                                                                       

                                                                      Chemical base:

                                                                      1-component polyurethane

                                                                       
                                                                       

                                                                      Specific gravity:

                                                                      approx. 1,25 g/ml

                                                                      DIN 53 479 B

                                                                       

                                                                      Sag resistance:

                                                                      excellent

                                                                      DIN EN 27 390-U 20

                                                                       

                                                                      Curing speed:

                                                                      2mm /24 hours

                                                                      normal atmosphere DIN 50 014-23/50-2

                                                                       

                                                                      Skinning time

                                                                      ca. 60-120 minutes

                                                                      normal atmosphere DIN 50 014-23/50-2

                                                                       

                                                                      Application temperature:

                                                                      +5°C to +40°C

                                                                      Substrate temperature

                                                                       

                                                                      Service temperature:

                                                                      -30°C to +70°C

                                                                       
                                                                       

                                                                      Movement capability:

                                                                      20 %

                                                                      of average joint width

                                                                       

                                                                      Shore-Hardness A:

                                                                      approx. 25

                                                                      as per DIN 53 505

                                                                      Testing condition: 23°C / 50% relative humidity

                                                                      Preparation

                                                                      and planning: Joints must be properly dimensioned as changes are normally no longer feasible after construction. Basis for calculation of the necessary joint width are the technical characteristic values of the joint sealer and the adjacent building materials, the exposure of the building elements, their construction and size.

                                                                      Condition of

                                                                      substrate: Clean and dry, free from dust and loose particles or surface treatments. Paint, laitance and other purely adhering particles must be removed by grinding. Clean joints with compressed air.

                                                                      Primer: Sika Primer 3 for porous substrates, e.g. concrete, aerated concrete and cement plaster.

                                                                      Flash off time : minimum 30 minutes, maximum 8 hours.

                                                                      Sika Cleaner 1 for powder coatings EP and PU coatings

                                                                      Flash off time: 15 minutes.

                                                                      Sika Primer 21 for PVC and for mortar in connection joints between PVC and building.

                                                                      Flash off time : minimum 30 minutes, maximum 8 hours.

                                                                      Sika Primer 35 for metals e.g. Aluminium, Noble Steel, galvanised steel,

                                                                      Flash off time : minimum 30 minutes, maximum 8 hours.

                                                                      Primers are only adhesion promoters. They are not substitutes for cleaning the surfaces nor can they improve their strength significantly

                                                                      For further information see our Sikaflex Primer table

                                                                      Backfilling: Use only close cell, sealant compatible foam backer rods e.g. high-resilience polyethylene foam rod.

                                                                      Calculation of

                                                                      material consumption: The following table gives an indication of running metres of joint one may seal with one 600 ml sausage:

                                                                      Joint

                                                                      depth

                                                                      running metres of joint per 600 ml unit width

                                                                      of joint b (mm)

                                                                      d (mm)

                                                                      8

                                                                      10

                                                                      12

                                                                      15

                                                                      20

                                                                      25

                                                                      30

                                                                      35

                                                                      8

                                                                      9,3

                                                                      7,5

                                                                      6,2

                                                                      5,0

                                                                      10

                                                                      7,4

                                                                      6,0

                                                                      5,0

                                                                      4,0

                                                                      3,0

                                                                      12

                                                                      4,0

                                                                      3,3

                                                                      2,5

                                                                      2,0

                                                                      1,8

                                                                      1,30

                                                                      15

                                                                      2,0

                                                                      1,6

                                                                      1,3

                                                                      1,00

                                                                      20

                                                                      0,8

                                                                      The stated values are indications only.

                                                                      Remarks: Elastic sealants should not be overpainted in general!

                                                                      Sealant compatible coatings may cover the joint sides to max. 1 mm. The compatibility must be tested individually according to DIN 52 452-2.

                                                                      Precautionary

                                                                      measures: Keep containers tightly closed in dry environment. Observe regulations on label.

                                                                      Consult and follow guidelines on the Material Safety Data Sheet

                                                                      内页链接: 西卡 sika 聚氨酯砂浆 聚氨酯地坪 环氧灌浆 水泥基灌浆 西卡灌浆 西卡胶

                                                                      友情链接: 医疗车 货车车厢     新闻中心: 行业新闻

                                                                      南充晚上可以耍的地方有哪些